Enhance cooling performance of your Thermalright eXtreme CPU Cooler:
Acoustic PC highly recomends OCZ FREEZE as the highest performance thermal compound and will increase cooling performance as much as 3-5 degrees lower temapture.
ArctiClean Two Step cleaner and purifier can also be pre applied in combination before your Thermal is put on. Using ArctiClean has proved to further enhance performance, longevity of
the compound therefore avoiding maintenance, and also prevents corrosion.
"Add on option available down bellow."


Technical Specifications:
- CPU Heatsink Dimension: L133 x W156 x H38 mm
- Weight: 790g (Heatsink only)
- Heat pipes: Six heat pipes
Cooling Fan Specifications:
- Dimension: L120*W120*H25mm
- Bearing type: FDB (Fluid Dynamic Bearing)
- Air Flow: 64 (CFM) Airflow
Compatibility
- Supports Intel Core i7 965XE/940/920 Processors
Installation: It is recommended that you look at the Thermalright FAQ's page for further information.
OVERCLOCKING your Core i7 Processor:
In showing what the Intel i7 Core processor can really do in extrame Overclocking, Thermalright ULTRA 120 eXtreme RT was suppolies by Intel see the Testament
from HardOCP. To check out the performance video review >> Click Here.
Thermalright Ultra-120 eXtreme 1366 RT CPU Cooler
Thermalright Ultra-120 Extreme 1366 RT CPU Cooler - Includes 120mm Cooling Fan & Fan Holder as show above
- Socket LGA 1366 : New Thermalright Intel Core i7 CPU Cooler.
- Includes: 120mm Ultra low noise “Fluid Dynamic Bearing” fan and new fan holder.
Thermalright Ultra-120 Extreme 1366 RT Quiet CPU Cooler Description
The Ultra Series features a patent-pending design of the fins. In every corner of every fin, a “winglet” is created. This bending of the corners creates an increased
air pressure and in return decreases air resistance, so even with a low RPM fan you get massive air flow through the fins. The use of the Thermalright 120mm
Ultra quiet fan significantly reduces high CPU temperatures. With a low fan RPM, the cooler is extremely quiet but performance remains, which is what you would
expect from a high-end CPU cooler.
The heatsink uses U-shaped heatpipes to transfer the heat from the base of the cooler up and through the attached fins, maximizing the heat transfer. But that’s
not all, due to the winglet design mentioned earlier, it also increases the surface area. All these features translate into efficient and quiet cooling cooling typical of
the high standard set by Thermalright's high quality CPU heatsinks.
Features:
- Uses high quality aluminum fins for best balance of heat absorption and conduction.
- Proprietary bent winglet design to minimize airflow resistance.
- Heat pipes soldered to base (nickel plated) and fins for optimum heat transfer.
- Stack of 52 pieces of aluminum fins, the most over any other heatsinks in the market.
- Can be covered entirely by a 120mm fan to absorb all in-coming air flow.
- Vast compatibility list for multiple multi-core CPUs and platforms.
- Includes one Ultra low noise “Fluid Dynamic Bearing” fan (1600RPM)
- Includes the NEW 120x25mm Fan holder.
Included Components:

The Reigning King of CPU Coolers