Acousti Products ™
Acousti Products Anti-vibration Gel Fan Mounts 4-Pack With Screws
A retail pack of 4 soft gel-like fan mounts that will help to greatly reduce transmitted vibrational noise from case fans, by isolating the mounted fan from the
case chassis. These mounts are designed for damping high-frequency vibrations. They can be positioned in standard fan mounting holes, and are designed to
be used with standard fan mounting screws (supplied).
Compatible with virtually all case fans
Use standard fan screws for fitting (supplied)
Quick and easy to fit
An effective and inexpensive solution for fan vibration noise
Suitable for Plate Mounting Hole: 4.6 - 5.6mm diameter
Suitable for Mounting Plate Thickness: 0.8 - 1.2mm
Hardness: Shore A <40
Recommended Compression: 5% of height
Operational Temperature Range: -20°C to +70°C
Fit the fan mount into the fan mounting hole in the case chassis, by carefully squeezing it gently into place - taking care not to tear the mount. Then position
the fan unit one side (usually inside the computer case) and fix the fan by threading a fan mounting screw through the mount centre (usually from outside the
case) and secure the fan by tightening the screw so that it only slightly compresses the fan mount.
Super Soft Silicone Composite Gel Mounts Close Up
The anti-vibration fan mounts are designed to be used in standard-type fan screw fittings, where the fitting holes in the case chassis are a standard diameter.
These fan mounts are not suitable for cases that have fan holes outside 4.6 - 5.6mm diameter, or that use a custom design fan 'clamp' or friction fit plastic
moulding to house case fans.